Round Filament Wound Carbon Fiber Tube For Marine , Automotive Industry
Filament Wound Carbon Fiber Tube Introduction
Carbon fiber composite tube has great advantage in high strength & light weight, the strength of carbon fiber reinforced polymer is 6-12 times of steel, and density is less than 1/4 of steel. Based on their superior mechanical properties, they can be used to replace or substitute aluminum or steel tubes in a wide range of projects. Widely used in telescopic pole, exhaust Pipe, paddle etc.
Filament Wound Carbon Fiber Tube Specification
| The surface of the grain | 3K twill |
| Effect of surface | Matte, light |
| Post processing | Drill, such as processing |
Carbon fiber winding of molding process
Winding molding process is soaked in resin adhesive solution of continuous fiber (or cloth belt, presoak
yarn) on winding to the mandrel according to certain rules, and then after curing, demoulding, obtain
products.According to the filament winding forming physical and chemical condition when the resin is
different, divided into dry winding, wet winding and half dry winding 3 kinds.(1) dry winding Dry winding is
adopted through presoak rubber processing presoak yarn or, on a winding machine after soften to
viscous flow winding onto the mandrel.Because of presoak yarn (or with) is a professional production, to
strictly control the resin content (accurate to 2%) and presoak yarn quality.Therefore, dry winding can
accurately control the quality of the product.Dry winding process is the biggest characteristic of high
production efficiency, winding speed can reach 100 ~ 100 m/min, winding machine cleaning, labor health
condition is good, high product quality.The downside is winding equipment is expensive, need to increase
in yarn manufacturing equipment, so the investment is bigger also, dry low interlaminar shear strength
of winding products.
Filament Wound Carbon Fiber Tube Packaging
Product Tags:
|
|
Round Filament Wound Carbon Fiber Tube For Marine , Automotive Industry Images
|
